|Load Capacity||0.75 tons|
|Length||6.5 inch /165 mm|
|Width||3.625 inch /92 mm|
|Height||3.437 inch /84 mm|
The Hilman Light Duty Series are perfect for the “lighter” range of heavy moving projects. Small and compact, these rollers can be easily stored away to keep as perfect maintenance tools for any shop.
Moving Types & Top Styles
Choose Rigid for straight line moving or Swivel for turning. Both versions are available topped with rugged no-slip pads or in a smooth top style, ideal for permanent mounting applications.
|Wheels in Front And Rear||8/8|
|Front Unit Width||17.875 inch|
|Rear Unit Width||6.25 inch|
|Front Unit Weights||96 lbs|
|Rear Unit Weights||59 lbs|
The Hilman Tri-Glide provides a stable, efficient solution for moving heavy loads over finished floors. It is designed with a large footprint to spread the weight of the load over a greater area. Our Polyurethane and Nylon rollers are non-marking and can be used on a variety of floor surfaces. The Tri-Glide low-profile keeps the load close to the ground for safe moving.
All Tri-Glide Systems contain one steerable front unit and two adjustable-width rear units.
3-point Load Moving Solution
The standard Tri-Glide includes a front steering unit and two rear adjustable units.
The steerable front unit contains a 360-degree swiveling turntable that allows the rollers to rotate under the load, making pushing and pulling more precise. The rear dollies are kept aligned by an adjustable spreader bar, allowing them to track properly when moving.
Placing the dollies in a 3-point configuration can stabilize the rollers and prevent them from slipping out, even under pulling and tugging forces. As the load is steered with the front unit, the rear dollies will follow, providing the user with a wide range of mobility.
While the 3-point configuration is recommended as a safe load moving solution, additional modules can be added and reconfigured to further stabilize, bulky loads.
|Roller Work Nature||Wetting With Rubber|
|Roller Surface||Natural Rubber|
|Length||8.625 inch (219 mm)|
|Height||2.75 inch (70 mm)|
|Width||4.437 inch (113 mm)|
|Weight||15 lbs /7 kg|
|Load Capacity||3.75 tons|
Two-piece design features base roller plus detachable swivel attachment. Especially valuable for a task requiring a roller with low clearance. The Roller base is designed for straight line moving. Attachments with swivel-locking capabilities can be used for easy turning.
Optional swivel attachments, manually situated on the Rollers enhance maneuverability and add minimal height to the basic roller, providing the ability to make turns without jacking the equipment. Attachments come with Diamond Steel or Padded Tops and all have swivel-locking capability. Padded attachments help minimize metal to metal slippage. Rollers can be used with two to four attachments depending on the amount of maneuvering the project calls for. 2 rollers can also be used with one or 3 swivels.
|Hilman Part #||Load Capacity (Tons)||Length (in)||mm||Width (in)||mm||Height (in)||mm||Weight (lbs/kg)||Contact rolls|
|Width||3.625 inch /92 mm|
|Height||3. 437inch /87 mm|
|Weight||7 lbs/3 kg|
|Load Capacity||0.5 tons|
|Jack Height Retracted||14.5 inch|
|Load Capacity||5 tons|
|Toe Height Extended||9.37 inch|
|Usable Toe Depth||2.19 inch|
|Length Of Pumping Handle||17.75 inch|
|Jack Height Extended||23 inch|
|Toe Height||1.06 inch|
The Hilman Toe Jacks allow you to get under and lift equipment with just over of ground clearance (1.06″ to be exact) and since there are lifting points on both the toe and the top of the jack these are the perfect complement to Hilman Rollers. Our Toe Jacks all comply with ASME B30.1 standards.
Features & Benefits
Reviewed by 35 Users
Most Relevant Reviews